Mitchell Stainless, a trusted manufacturer and supplier in Hamilton, New Zealand, provides high-quality Stainless Steel 301 tubing, designed for applications requiring excellent corrosion resistance, high strength, and good formability. 301 is an austenitic stainless steel that offers a balance of toughness, ductility, and durability, making it ideal for structural, mechanical, and precision tubing applications. Mitchell Stainless ensures that each tube meets strict quality standards, providing smooth surface finishes and consistent dimensions. These tubes are suitable for industrial, chemical, and architectural applications where both strength and corrosion resistance are essential.
Stainless Steel 301 tubing is composed primarily of iron, with 16–18% chromium, 6–8% nickel, and small amounts of manganese, silicon, and carbon (max 0.15%). This composition provides good corrosion resistance, high tensile strength, and excellent ductility. The combination of chromium and nickel ensures resistance to oxidation and environmental corrosion, while maintaining good formability and weldability. 301 tubing is suitable for applications where mechanical performance, durability, and corrosion resistance are required without the need for additional heat treatment.
Tubing Specification : ASTM A312, A358 / ASME SA312, SA358
Dimension Standard : ANSI B36.19M, ANSI B36.10
Outside Diameter : 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Outside Finish : 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
| Grade | C | Ma | Si | Ph | Su | Ch | Ni | Nr |
| SS 301LN | 0.03max | 2.00max | 1.00max | 0.045max | 0.015max | 16.5-18.5 | 6.0-8.0 | 0.07-0.20 |
| Element | Tensile strength (Outokumpu typical, cold rolled strip/sheet; EN 10002-1) | Yield strength (@strain 0.200 %) | Elastic modulus | Poisson’s ratio | Elongation at break (in 50 mm) |
| Metric | 765 MPa | 350 MPa | 193 GPa | 0.300 | 47% |
| Imperial | 111000 psi | 50800 psi | 27992 ksi | 0.300 | 47% |
Contact us to get a quick quote for your requirement.
Mitchell Stainless ensures the highest stainless steel 301 tubing standards through rigorous testing and certification programs. Extensive analyzes are performed on each formulation, including chemical composition analysis, mechanical property testing and validation theory. Certificates such as Mill Test Reports (MTR) and compliance with international standards have been issued to ensure product reliability and efficiency.
Known for its excellent corrosion resistance, Stainless Steel 301 Seamless Tubing is available in sizes ranging from 1/4 inch to 12 inches in diameter. It is typically used in structural applications due to its strength and durability.
Offering good corrosion resistance, Stainless Steel 301 Welded Tubing comes in sizes from 1/2 inch to 6 inches in diameter. It is produced by welding flat-rolled stainless steel and is commonly used in various industrial applications.
With robust corrosion resistance, Stainless Steel 301 Heat Exchanger Tubes are available in sizes from 1/4 inch to 2 inches in diameter. These tubes are designed for efficient heat transfer in heat exchangers.
This tubing provides high corrosion resistance and is available in diameters ranging from 1/8 inch to 2 inches. It is used in various instrumentation and control applications due to its precision and strength.
Featuring good corrosion resistance, Stainless Steel 301 Boiler Tubes come in sizes from 1 inch to 4 inches in diameter. They are utilized in boilers for steam and water applications due to their high thermal and mechanical properties.
Known for their corrosion resistance, Stainless Steel 301 U-Tubes are typically available in sizes from 1/2 inch to 2 inches in diameter. They are often used in heat exchangers and other applications requiring curved tubing.
Offering strong corrosion resistance, Stainless Steel 301 Condenser Tubes are available in diameters from 1/2 inch to 4 inches. They are designed for use in condenser units where high thermal efficiency and resistance to corrosion are critical.
With excellent corrosion resistance, Stainless Steel 301 Fin Tubes are usually available in sizes from 1/2 inch to 2 inches in diameter. They are used in heat exchangers where increased surface area is required for heat transfer.
Stainless Steel 301 tubing is widely used in chemical processing equipment, food and beverage machinery, automotive components, architectural structures, and industrial machinery where strength, corrosion resistance, and formability are critical. Typical applications include structural tubing, hydraulic systems, fasteners, conveyor systems, and decorative or functional architectural elements. It is also used in maintenance and repair projects where durable and corrosion-resistant tubing is required. In New Zealand’s fabrication and industrial sectors, 301 tubing is valued for producing long-lasting, high-quality components that combine excellent mechanical properties with corrosion resistance and aesthetic appeal.
©2024 Mitchell Stainless All Rights Reserved.
